HP is a very popular brand, and it makes many electronic devices that are good for work and quality. One of those is setting up HP printers, which are used for printing documents. It works on a Wi-Fi connection or is connected with cables. There are many types of printers like multi-function printers, single-use printers, and mobile all-in-one printers, which are used in both homes and offices.
Now, how to set the HP printer step-wise:
Step1:
- Unbox the printer
- Take the printer out of the box.
- Unboxing it by removing all the tapes and package materials from the outside of the printer.
- Down the output tray, reach inside the printer, grab the handle, open the door, and lower the ink cartridge.
- There is also the packaging material inside it, so remove it.
- Before recycling the box and package materials, remove all the hardware and materials inside the box.
Step 2:
Connect with the power cord.
Plug the printer into the power source to turn it on.
Also, the main point is that you do not connect a USB cable at this time. Connection is done at the time of software installation.
• Firstly, connect the power cord to the front of the printer and then connect the other end to an electrical plug.
• To turn on the printer, press the power button.
• wait for your printer to start and be silent before you continue.
Step3:
Installation of ink cartridges
Install the ink cartridges that are in the printer box at the time of shipping.
• Remove the ink cartridge from the box. Carefully, only touch the black plastic on the ink cartridge.
• Remove the plastic tape.
• Do not replace the protective tape on the contacts; also, do not touch the copper-colored contacts or the ink nozzles.
• Then insert the ink cartridges into their slots by holding them by their sides with the contacts, and then gently push the ink cartridge until it fixes into place.
• Always install it on the left and the back ink cartridge on the right.
• After these steps, close the ink cartridge access door, and then close the output tray.
Step4:
Loading paper into the input tray
Load plain and A4-type paper in the tray after installing the ink cartridges.
• In the first step, raise the input tray.
• Then slide the paper width guide all the way to the left.
• Also load the stack of plain paper into the tray.
• Slide the paper in the tray to the right until it rests at the edge of the paper.
• To pull out the tray extender, lower the output tray, and then pull it.
Step5:
Download and install the printer software
After setting up your hardware, you can install the printer software.
Visit the website of HP, search for the model name, and download the software.
After downloading, install the software to fully Setup HP Printer.
How to Setup HP Printer on wifi
Wifi ( wireless fidelity) is a wireless networking technology that connects devices such as computers, smartphones, laptops, desktops, printers, and other equipment to the Internet. With the help of creating a network helps us exchange information with one another
It connects through a router, which is a box of loaded internet networks. When you access Wi-Fi, you are connecting to a wireless router that is connected to the internet through a compatible device.
Now, below the some points on how we Setup HP printer on a Wi-Fi connection.
1. Restore wifi mode on the printer.
By restoring the Wi-Fi setup mode, prepare your printer for a wifi connection.
• Most of the HP printers come with a touchscreen feature…